2009/08/29
Deployment to Folger Deep
Last Changed by Mairi M.R. Best , 02-Sep-09 07:08
Labels: showcomments, folger-passage, ropos, deployment, sediment, installation, hydrophone, bottom-pressure-recorder, adcp, echosounder, oxygen-sensor, ctd
Labels: showcomments, folger-passage, ropos, deployment, sediment, installation, hydrophone, bottom-pressure-recorder, adcp, echosounder, oxygen-sensor, ctd
On Friday August 28, the R/V Thompson and ROPOS crews deployed our instrument platform to Folger Deep. Instruments on the platform include:
- conductivity-temperature-depth (CTD) gauge (SeaBird SeaCAT SBE 16plus)
- echosounder (Biosonics DT-Xu)
- acoustic Doppler current profiler (RDI Workhorse Monitor 300KHz)
- oxygen sensor (Aanderaa optode)
Two additional instruments, a Naxys hydrophone and a bottom pressure recorder, were positioned close to the instrument platform.
This platform is connected to the Folger Passage node. We will return later to run a 700m cable from the node to the Folger Pinnacle.
Preparing Folger Deep Instrument Platform |
|||
|---|---|---|---|
|
|
|
|
|
Floger Deep platform with bottom pressure recorder prior to deployment.
|
Folger Deep platform as seen from above.
|
ROPOS crew members Keith Shepherd, Kim Wallace, Dan Cormany and NEPTUNE Canada contractor Jason Williams.
|
Lovely evening off Folger Island, one of the Deer Group islands. Photo taken from the site of our Folger Deep instrument platform.
|
Welcome to Folger Deep Platform |
|||
|---|---|---|---|
|
|
|
|
|
Fish swim in murky water near the Folger Deep instrument platform.
|
ROPOS used both arms (dubbed "Yin" and "Yang") to carry the connector from the platform to the node.
|
ROPOS reaches into the Trawl-Resistant Frame to plug the connector into Folger node. The water was very cloudy, making this a very difficult task.
|
ROPOS deploys the Folger Passage bottom pressure recorder, 28 August 2009.
|
